HOME ABOUT US PRODUCTS ORDER FORM BECOME DISTRIBUTOR FEEDBACK CONTACT US  
NEELKANTH™ ARMAC™
RUBBER HOSE FOR WELDING
APPLICATION:
Recommended for use With welding and gas cutting in a workshop, Shipyards, construction Sites and manufacturing Industries etc.
 
CONSTRUCTION TUBE :
Uniform in thickness, manufactured with natural and synthetic rubber.
 
REINFORCEMENT :
High tensile synthetic yarn.
 
COVER :
Blue for -oxygen & non fuel gases.
 
Temp :
-40°F to +160°F
 
 

IS:447 - 1988
TECHNICAL SPECIFICATION

Nominal
bore
in mm

Tolerance on
Nominal
bore in mm

Minimum
thickness
of Tube in mm

Minimum
thickness
of Cover in mm

Working
Pressure
Kgf/cm2

Proof
Pressure
Kg.f/cm2

6.3

± 0.75
1.50
1.00
12.5
25

8.00

± 0.75

1.50

1.00

12.5

25

10.00

± 0.75

1.50

1.00

12.5

25
 

RUBBER HOSE FOR LPG
APPLICATION:
Transfer of LPG in liquid or vapour form.
Type-I, II, III hoses are use for industrial application like LPG bottling plant.
Type-IV are use for domestic & commercial installations.
 
CONSTRUCTION TUBE :
Black, oil resistant compound /synthetic rubber like (NBR) or (CR).
 
REINFORCEMENT :
High tensile brass coated steel wire/textile plies or braided.
Type I & III : Wire braided, of stainless steel.
Type II : Synthetic fibre braided.
Type IV : Wire braided in between linning & cover.
 
COVER :
Synthetic rubber compound resistant to abraison, weather and fire.
Type I, II, III - Black
Type IV - Orange
 

IS:9573/1988
TECHNICAL SPECIFICATION

Nominal
bore
in mm

Minimum bore diameter (mm)
TYPE
I
II
III
IV

Minimum
brusting pressure
mPa

6.3

6.1
5.6
5.6
---
5.0

8.0

7.9
---
---
7.9

5.0

10.0

10.3
---
---
10.3

5.0

12.5
12.7
11.9
11.9
12.7
5.0
16.0
15.9
---
---
---
5.0
19.0
18.7
18.9
18.9
---
5.0
22.0
22.2
---
---
---
5.0
25.0
25.0
24.6
24.6
---
5.0
31.5
31.17
31.0
31.0
---
5.0
38.0
38.0
37.3
37.3
---
5.0
51.0
50.4
49.3
49.3
---
5.0
 
Next >>
HOME ABOUT US PRODUCTS ORDER FORM BECOME DISTRIBUTOR FEEDBACK CONTACT US